HP 2530-8G Switch J9777A

8 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only

2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-Tx; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers) ports

Dimensions: 10(w) x 6.28(d) x 1.75(h) in (25.4 x 15.95 x 4.45 cm) (1U height)
Weight: 2.0 lb (0.91 kg)

100 Mb Latency < 7.4 µs (LIFO 64-byte packets)
1000 Mb Latency < 2.3µs (LIFO 64-byte packets)
Throughut up to 14.8 Mpps (64-byte packets)
Switching capacity: 20 Gbps
MAC address table size: 16000 entries

Operating temperature: 32°F to 113°F (0°C to 45°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature:-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity:15% to 95% @ 149°F (65°C), noncondensing
Altitude: up to 10,000 ft (3 km)
Acoustic: Power: 0 dB, Pressure: 0 dB

Frequency: 50/60 Hz
Maximum heat dissipation: 203 BTU/hr (214.17 kJ/hr)
Voltage: 100 - 240 VAC, rated
Maximum power rating: 18.6 W
Idle power: 13.6 W
Notes: Maximum power rating and maximum heat dissipation are the worst-case theoretical : maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated

FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A